In United States Publish
Post Time: 2025-07-18

Ok so what’s going on here and what’s all over the ground? We’re getting ready to build a house on 5 acres and the first thing we want to do is drill a well. It’s hard to budget for the cost of a well because you don’t know how deep you must go to get water, so I like to get this out of the way early. The guys grabbed 20-foot sections of drill rod our of the carousel and thread them onto the previous piece. They use non-polluting grease on the threads, so they won’t seize. This rig uses 350 PSI of air to power a pneumatic rotary hammer to drill into the bedrock. At 160 feet we hit a lot of water- Here’s how they measured the gallons per minute: They created a damn around a section of PVC pipe so they could fill a one-gallon container with water. We timed how long it took to fill- 2 seconds. 60 seconds divided by 2 seconds is 30- that meant we had 30 GPM. I made this drawing to explain how it went- They hit bedrock at 20 feet down, at this point they put in a piece of steel casing. They drove the casing into the bedrock to make a seal. The casing keeps surface water from leaking into the well. Next, they drilled down to 160 feet where they hit a lot of water- this company always drills a minimum of 200 feet, in case there’s a drought, we’re more likely to still have water. Let me know in the comments -how much do you think this well will cost? @hausplans #build #howto #construction #diy #contractor #drillingwell

How To Drill A Well For Country: United States. City: Cape Coral, Corona, Jackson, Milwaukee, Pomona

Tag: #Click The Next Website, #simply click the next internet site, #source for this article, #one-time offer, #additional resources